This is our latest design for the par light in 2021, and it enjoys favorable market feedback due to the following advantages: *aluminum shell +fine sand wear-resistant spray paint +round appearance and unique bottom shell design. *all-directional ventilating system, the mainboard, the light source is heated evenly. * Intelligent temperature control fan for active heat dissipation: silent below 40 degree, and fan starts working smoothly when above 40 degree. The fan can be turned off optionally with intelligent power reduction. * Maximum noise is 43.0dBA from 1 meter away (close to ambient noise), you can choose to turn off fan and use silent mode without any noise. Power will reduce according to temperature to keep led lamp safe when temperature above 80 degree. *linear dimming for smooth color switch. * We can produce different types of this led par by changing quantities of led lamp and power at the same time keeping same case design. This LED par light is the most cost-efficient one in N series par lights. its illumination reaches 13600lux @ 2 meters. It supports RDM protocol and its innovative design, together with high quality is likely to earn a considerable market share.
How to Install par cans ceiling lamps for prefabricated hollow slabs? Personal experience for your reference.First, if it is installed in the built house, it is estimated that it can only be installed with impact drilling. As for the pipe Road, it has to go to the open line. Then look for the person who makes the plaster line, use the flat line in the middle of the ceiling to make a diamond-shaped flower, and make the 8-cent Yangxian strip on the edge. The diamond-shaped mosaic is one square in 200 yuan, and the Yangxian is one meter in 10 yuan. Due to the large demand for engineering lamps and lanterns, the development prospects are relatively good. now Engineering lamps have many brands. So, what are the brand of engineering lamps? Users can reduce recycling costs required to dispose of hazardous bulbs and ballast thanks to its low maintenance rate.
LED Indoor Par Light uses 18 pieces of 10W RGBW 4 in 1 LED lights. RGBW 4 in 1 LED Lights can meet the customer's demand for red, green, blue and white color effects. Its voltage reaches AC100~240V 50/60HZ and its power reaches 180W. LED Par Light can achieve stroboscopic effect and has 3 stroboscopic modes. Its strobe frequency reaches 0-20 HZ. RDM control mode is one of the advantages of LED Indoor Par Light. Through the RDM control mode, users can operate remotely from the console. The case of the light is made by engineered aluminum profile and fine sand paint, which can protect this LED light from damage caused by violent collision and excessive temperature. The handle of LED Par Light is the limit handle. The inner and outer handles open at 80°angle. The users can put the lamp on the ground to ensure that the lamp will not fall to the ground. When the users put the light in a straight line, you will find that all the lights are unified angle and unified height, which looks very beautiful and wonderful. LED Indoor Par Light 4 in 1 has intelligent temperature control of fan for heat dissipation, muting below 40°C, starting heat dissipation above 40°C. Users can choose to turn off fan and use silent mode without any noise , but power will reduce to keep LED light safe when temperature above 80°C. LED Par Light is compact in size and weighs 2.9KG, which can be perfectly used in stage performances, banquet halls and other places.
Lux
Product Parameters :
Electrical | voltage | 110V ~ 240V | |
power consumption | 180W | ||
Light source | LED | 10W*18pcs | |
Color | RGBW (four in one) | ||
Control mode | DMX512 | 9/6ch | |
Master/slave | √ | ||
Manual control | √ | ||
Sound Active | √ | ||
auto | √ | ||
Optical system | Beam Angle | 25° | |
Dimmer | 0~100% line dimmer | ||
Strobe | 0-20Hz | ||
Noise | Noise mode | Intelligent temperature, active heat dissipation,silent below 40 degrees, fan begin to work when temperature above 40 degrees. maximum noise is 43.0dBA from 1 meter away (close to ambient noise),you can choose to turn off fan and use silent mode without any noise , but power will reduce according to temperature to keep led lamp safe when temperature above 80 degree. | |
Physical | Machine size | 28.2x13.9x25.3cm(excluding hook) | |
Machine weight | 2.9kg | ||
Environment& safty | Stock | dry and clean place | |
Running temp. | 40°C Max |
Light Effect :
Product Appearance And Size :
Firstly, let us know your requirements or application. Secondly, we quote according to your requirements or our suggestions. Thirdly, the customer confirms the samples and places a deposit for formal orders. Fourthly, we arrange the production.
Yellow river Lighting WorkShop:
4.Is a stage lighting enterprise that gathers research, production, marketing, and after-sales as an integral whole.