Stage lighting project debugging plan

1. Debugging of lighting circuit The debugging of lighting circuit is the key to project debugging. The lighting system involves the most equipment, so we must first concentrate on completing it. The instruments and tools that need to be prepared: light meter, clamp meter, multimeter, etc. Debugging steps: Turn on the light separately, start from the silicon cabinet and check the transmission of the circuit step by step, then debug the dimming console and the silicon cabinet, the adjustment of the dimming console can be classified, the scene with the dimming console, sequence program editing It can be carried out according to the commissioning manual and design drawings, and the silicon cabinet can also be carried out according to the manufacturer's instructions. Debugging of stage lights: 1. First of all, carefully check the individual operation of each device. Try to check the status of each device before the system is connected or installed, so that the purpose of checking both the lamp and the console can be achieved.

2. Secondly, it is necessary to correctly set the lamps and lanterns. 3. The second is to set the lighting control equipment. 4. The last thing that needs to be explained is that after the above steps are completed, it is necessary to check whether the actions of the controller and the lamps are consistent.